The gateway to Europe's
integrated metrology community.

News

Optical clock comparison shows new high accuracy, resulting in a Nature paper

Hourglass, an early timekeeping device

A recently completed EMPIR project confirms unprecedented ultra-low deviation between two independent single-ion optical clocks

The project 'Optical clocks with 1E-18 uncertainty' (15SIB03, OC18) compared two optical clocks, based on single ytterbium ions, for more than 1000 hours. The relative deviation between the "tick" rates of the clocks was found to be less than 3×10-18, in agreement with the previously estimated accuracy. This means that after approximately ten billion years these clocks would deviate from each other by one second.

The current definition of the SI second is based on energy levels in the caesium-133 atom, and the best atomic clocks that realise this definition achieve uncertainties in the range of 2×10-16. Even though this accuracy is far superior to that of all the other SI units, it needs to be improved further in order to address many of the scientific challenges emerging in modern physics.

One of those challenges is at the focus of a Nature publication that reports the ytterbium clock comparison experiment in the EMPIR project.

This new measurement not only has implications on plans to redefine the SI second but will also aid those working in fields where such very high accuracy is needed – including satellite navigation, geodetic height measurement, radio astronomy, and in some exciting quests into fundamental physics.


This EMPIR project is co-funded by the European Union's Horizon 2020 research and innovation programme and the EMPIR Participating States.

Want to hear more about EURAMET?
Sign up for EURAMET newsletters and other information

Follow us on LinkedIn and Twitter

 

Information

Date
2019-11-05
Tags
  • EMPIR,
  • SI Broader Scope / Integrated European Metrology,

X-ray image of shoulder

Webinar on X-ray imaging dosimetry challenges attracts record numbers
2024-10-15

Providing the metrology required to ensure patient safety during medical x-rays more

CO2 storage and recycling

Partnership project helping to advance carbon capture utilisation and storage techniques
2024-10-10

To reach carbon neutrality not only do we need to reduce the burning of fossil fuels but also find ways of utilising and storing CO2 more

The Arctic research station in NY-Ålesund, Norway © The COAT project

EURAMET project performs a comparison of thermometer radiation shields in the Arctic
2024-10-08

Polar regions are very sensitive to climate change – and monitoring these regions provides early indications of potential climate trends more

Energy Storage System With Hydrogen Storage Compartment

EMPIR project identifies a reference material for the safe and efficient storage of hydrogen gas
2024-10-02

Hydrogen is an energy gas which can be stored, providing a backup for more fluctuating energy sources, but this area still lacks important metrology more

Air pollution from smokestacks

Proceedings from workshop about commercially available CO2 conditioning technologies
2024-10-01

Creating metrology frameworks for carbon capture, utilisation and storage to help Europe reach carbon neutrality more