Calibration of position deviations of graduation lines from their nominal values on linescales. Depending on the available measurement range and the measurement capabilities 3 different samples, a 100 mm, a 300 mm and a 400 mm line scale are to be measured.
Due to the large number of participants the samples will be circulated in 3 loops in parallel.
The technical protocol can be downloaded here>>
| Subjects |
|---|
| Length (L) |
| Coordinator |
|---|
| Coordinating Institute |
|---|
| PTB (Germany) |
| Further Partners |
|---|
|
Korea Research Institute of Standards and Science (KRISS) South Korea (KR) National Institute of Metrology (NIM) China (CN) National Metrology Institute of Malaysia (NMIM) Malaysia (MY) National Measurement Standards, National Standardization Agency of Indonesia (SNSU-BSN) Indonesia (ID) National Measurement Institute, Australia (NMIA) Australia (AU) National Physical Laboratory, India (NPLI) India (IN) Kazakhstan Institute of Standardization and Metrology (KazInMetr) Kazakhstan (KZ) National Scientific Centre "Institute of Metrology" (NSC-IM) Ukraine (UA) Centro Nacional de Metrologia (CENAM) Mexico (MX) National Institute of Standards and Technology (NIST) USA (US) National Measurement & Calibration Center, Saudi Standards, Metrology & Quality Org. (SASO-NMCC), Saudi Arabia |